Simplicity™ Series

Adhesives Melters, Low Volume Melters
The Simplicity Adhesive Supply unit features a modular design that makes it simple to install, operate and maintain. Its unique design that makes in simple to install, operate and maintain. Its unique design and performance features set it apart from the competition, minimizing downtime and maximizing flexibility and reliability.

SIMPLICITY

Intuitive V6 controls and clear
easy-to-read display

EFFICIENCY

Patented Melt-On-DemandTM technology melts only the adhesive necessary

RELIABILITY

Less nozzle clogging means reduced maintenance and less downtime

SYSTEM DOZOWANIA KLEJU SIMPLICITY™

The SimplicityTM ASU takes innovation, technology and performance to the next level. Clear, intuitive V6 controls and
a modular design make it simple to install, operate and maintain. With a distinctive new orange ceramic coating, this compact unit features an HMI and hopper lid swivel for fl exible confi gurations, while its small internal reservoir and auto-feeding system rivals “tankless” systems. To match the production needs optimally, at the 16 kg hopper (only) a pre-melt grid can be mounted to increase the adhesive melt rate and two piston pumps can be mounted to double the delivery rate, which make SimplicityTM unique and exceptional in his class.

Features:

• “Turn it on and walk away” convenience makes it an
outstanding value
• Vertically integrated pump with easy-spin pump fi lter
• Easy-to-operate single board control eliminates the
need for extensive training
• Melt-On-Demand technology eliminates charring and
reduces maintenance
• Dual piston pump capabilities (16 kg unit only)
• All-in-one fi lter/regulator with integrated pre-fi lter and
coalescing fi lter

Options:

• 4 kg, 8 kg, 16 kg tank sizes
• 400 VAC or 480 VAC w/o neutral transformers
• Low-Level sensor
• Pre-fi lter gauges cue fi lter change or clogged nozzles
• Dynafi ll auto feed capable
• Accommodates as many as six hoses
• Available pre-melt grid for increased melt rate

MELT-ON-DEMAND HOPPER

Adhesive degradation is recognized as the number one cause of downtime on hot melt equipment. To address this problem, ITW Dynatec has patented a “Melt-On-De-Mand” system. ITW Dynatec’s vertical, unheated hop-pers only melt the amount of adhesive required by the application. Most of the hot melt adhesive in the hopper remains at a much lower temperature, perhaps even solid state. The added benefi ts of melting only the ad-hesive required are quicker start-ups, reduced energy costs, better viscosity control, and reduced fumes.

System4KG8KG16KG / 16KG Dual Piston Pump
Hopper capacity4 kg (9 lbs)8 kg (18 lbs)16 kg (35 lbs)
Operating temp. 10° C to 232° C (50° F to 450° F)
Melt rate* 25 lbs/h 25 lbs/h 50 lbs/h
w/ Optional Grid N/A N/A N/A
Piston pump rate 4/8/16KG = 0.91 kg/min (2 lbs/min) 16KG DPP = 1.81 kg/min (4 lbs/min)
Piston pump comp. - 12:1 -
Hose/Head output zones - 2, 4, 6 -
Max. working hydraulic pressure - 68 bar (1000 psi) -
Temp. Control Stability - +/- 1° C (1° F) -
Supply voltage setup 230 VAC Single Ph, 240 VAC 3Ph Δ, 230/400 VAC 3Ph + N + PE, 400/480 VAC, 3Ph. Δ
Working Viscosity - 500 to 50,000 cps -
Height 454.5 mm (17.89 in) 541.5 mm (21.32 in) 510.6 mm (20.10 in)
Depth 339 mm (13.34 in) 339 mm (13.34 in) 431.2 mm (16.97 in)
Width 6619.5 mm (24.39 in) 619.5 mm (24.39 in) 712.9 mm (28.07 in)

Open Hours

Mo-Fri: 8:00 - 16:00

Bank Pekao S.A.

PLN: 51 1240 6670 1111 0010 8716 8735 
EUR: PL93124066701978001087995689